Using the System
ENGLISH
6
The writing on the front of the headset should
face away from your body. The infrared signal is
received on the front of the headset.
1. Using both hands, gently separate the bow arms
and place earpieces into each ear (similar to
placing a stethoscope).
2. The VOLUME control will be located on the
RIGHT side. Rotate the dial to turn ON the
headset and set the volume to your
comfort level.
3. The TONE control (bass and treble) will be
located on the LEFT side. Rotate the dial to adjust
the tone to your preference.
The TV Ears headset receives an invisible infrared light
signal from the transmitter. The infrared signal cannot
pass through walls or solid objects, so make sure the
headset has a clear line of sight to the transmitter. The
headset can only pick up the infrared signal in the same
room as the transmitter.
Step
1
Using the
Headset
1
2
To Next Page
