All operating instructions must be read and understood before the product is operated.
These safety and operating instructions must be kept in safe place for future reference.
All warnings on the product and in the instructions must be observed closely.
All operating instructions must be followed.
Do not use attachments not recommended by the manufacturer. Use of inadequate attachments
can result in accidents.
This product must be operated on a power source specied on the specication label.
If you are not sure of the type of power supply used at your side, consult your dealer or local
power company. For units designed to be operated on batteries or another power source, refer to
the operating instructions.
The power cords must be routed properly to prevent people from stepping on them or objects
from resting on them. Check the cords at the plugs and product.
Do not overload AC outlets or extension cords. Overloading can cause re or electric shock.
Never insert an object into the product through vents or openings. High voltage ows in the
product, and inserting an object can cause electric shock and/or short internal parts.
For the same reason, do not spill water or liquid on the product.
Do not attempt to service the product yourself. Removing covers can expose you to high voltage
and other dangerous conditions. Request a qualied service person to perform servicing.
If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a
qualied service person to perform repairs.
a. When the power cord or plug is damaged.
b. When a liquid was spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions.
Improper adjustment of controls not described in the instructions can cause damage,
which often requires extensive adjustment work by a qualied technician.
e. When the product has been dropped or damaged.
f. When the product displays an abnormal condition. Any noticeable abnormality
in the product indicates that the product needs servicing.
In case the product needs replacement parts, make sure that the service person uses replacement
parts specied by the manufacturer, or those with the same characteristics and performance as the
original parts. Use of unauthorized parts can result in re, electric shock and/or other danger.
To Next Page
Loading...
Need help?
General
