Need help?Do you have a question about the TV Logic LVM-245W and is the answer not in the manual?
General| Resolution | 1920 x 1080 |
|---|---|
| Panel Type | IPS |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Viewing Angle | 178° (H) / 178° (V) |
| Aspect Ratio | 16:9 |
| Input Ports | HDMI, DisplayPort, DVI-D |
| Input Signals | HDMI, DVI |
| Color Depth | 8-bit |
| Response Time | 5 ms |
Supports various SDI signal formats including 480i, 720p, 1080i, and 1080p.
Supports various analog signals like Composite, S-Video, Component, and RGB.
Slim, integrated monitor design requiring no extra accessories for space optimization.
Features a 16:9 native aspect ratio for enhanced monitoring conditions.
Allows remote control via simple cable connection without additional peripherals.
Includes built-in DVI (Analog/Digital) and HDMI (HDCP) inputs without extra accessories.
Supports UMD protocols from TVLogic or TSL.
Facilitates color calibration through serial communication.
Enables Ethernet and USB connections for program download and monitor control.
Supports Dual Link YCbCr/RGB 4:4:4 and YCbCr 4:2:2 formats.
Supports 3G A/B formats for advanced video signals.
Includes wide viewing angle, loop through, contrast ratio, brightness, VESA mounting, and user interface.
Details the buttons, lamps, and knobs on the front panel of the LVM-245W.
Lists and explains the various input/output ports on the rear panel of the LVM-245W.
Details the buttons, lamps, and knobs on the front panel of the LVM-327W.
Lists and explains the various input/output ports on the rear panel of the LVM-327W.
Explains specific front panel controls like Status Indicator, Analog, SDI, PBP, Function buttons, Scan, and Marker.
Provides detailed descriptions of rear panel connectors like RS422, REMOTE, RS-232, SDI, HDMI, DVI, LAN, AUDIO IN, AC IN.
Explains how the product is controlled and set up via the OSD.
Details how to use the MENU, UP/DOWN, and ENTER buttons for control.
Step-by-step guide for navigating and making selections within the OSD menu.
Explains the information displayed in the main menu window.
Provides a hierarchical list of available menu options for PICTURE, VIDEO, COLOR, DISPLAY, and GPI.
Lists remaining menu options for MARKER, WAVEFORM, AUDIO, and SYSTEM.
Details the PICTURE menu settings like BRIGHT, CONTRAST, CHROMA, PHASE, APERTURE, NTSC SETUP, etc.
Details VIDEO menu settings like DITHERING, FILTER, FAST MODE, FORCE psf, FILM MODE DETECTION, SDI FORMAT, etc.
Details COLOR menu settings like COLOR TEMP, GAIN RED, GAIN GREEN, BIAS, BACK LIGHT, COLOR SPACE, and GAMMA CURVE.
Details DISPLAY menu settings like HD DISPLAY MODE, TIME CODE ENABLE, ORBITER CIRCUIT, CLOSED CAPTION, etc.
Details GPI settings, REMOTE CONTROL mode, pin assignments, UMD, and TALLY settings.
Details MARKER settings like FIT MARKER, MARKER type, CENTER MARKER, SAFETY AREA, MAT, COLOR, and THICKNESS.
Details WAVEFORM/VECTOR settings, including modes, display options, intensity, transparency, and color.
Details AUDIO settings like LEVEL METER SELECT, DISPLAY, REFERENCE, DECAY TIME, SIZE, POSITION, VOLUME, and Em. AUDIO.
Details SYSTEM settings like USER CONFIG, LOCK, OSD DISPLAY, OSD POSITION, SET DEFAULT, SIGNAL LOCK, and KEY FUNCTIONS.
Explains processing of analog input signals and selection of analog sources.
Describes the four available aspect modes for image display.
Explains how to activate and select marker types.
Describes various scan modes and their activation sequence.
Explains OVER SCAN, ZERO SCAN, UNDER SCAN, 2:1 SCAN, 1:1 SCAN, FIT WIDTH, USER ASPECT, and 3 X ZOOM modes.
Lists supported resolutions and frequencies for DVI ANALOG and DVI DIGITAL modes.
Lists the technical specifications for the LVM-245W model, including size, resolution, and connectivity.
Lists the technical specifications for the LVM-327W model, including size, resolution, and connectivity.
Displays images and types of optional accessories available for the monitors.
To Next Page
