18
LVM-171W / 241W / 401W / 461W / 571W
On the pin to be used, set the function you desire with the ENTER button and
UP/DOWN button. The method of setting the value is the same as that for the MENU
function discussed earlier.
[5] SYSTEM menu
· SET DEFAULT
You can use the SET DEFAULT menu to reinitialize the values of BRIGHT, CONTRAST,
PHASE and CHROMA of the monitor.
Menu
Classification
Settable Values
PIN 1~6
NONE, ANALOG CHANNEL, DIGITAL A/B CHANNEL, BLUE
ONLY, SD 1:1 SCAN, UNDER SCAN, ASPECT, H/V DELAY,
16:9,15:9,14:9,13:9 MARKER, 4:3, 4:3 ON AIR MARKER,
1.85:1, 2.35:1 MARKER, 1.85:1&4:3 MARKER, CENTER
MARKER,SAFETY AREA 80% / 88% / 90% / 93%, TALLY RED,
TALLY GREEN
To Next Page
Loading...
Need help?
General
