Need help?Do you have a question about the TVLogic LVM-242W and is the answer not in the manual?
Supports a wide range of SDI and analog input signals for versatile use.
Offers features like Waveform/Vector Scope, Audio Meter, and remote control capabilities.
Buttons for selecting Analog, SDI-A, SDI-B, DVI, SCAN, ASPECT, and MARKER inputs.
Controls like Aperture, Brightness, Chroma, Contrast, Volume, and menu navigation buttons.
Controls for Marker, H/V Delay, Blue Only/Mono, Phase, and Timecode display.
Menu, UP/DOWN, ENTER, Power buttons, and TALLY lamp description.
Buttons for Analog, SDI-A/B, SCAN, ASPECT, MARKER; knobs for Brightness, Chroma, Contrast, Volume.
Menu, UP/DOWN, ENTER, Power buttons, and TALLY lamp description.
Controls for aspect ratio, marker activation, and H/V delay.
Buttons for Blue Only/Mono, Chroma/Phase, Menu, and OSD navigation.
Description of various BNC, DVI-I, SDI, and audio connectors on the rear panel.
Ports for Remote, RS-422, Power Switch, AC IN, and DC IN.
Details on REMOTE (RJ-45), DVI-I, SDI IN/OUT, CVBS, and other signal inputs.
Specifications for Audio IN/OUT, FACTORY PGM, DC/AC IN, POWER S/W, and video input mapping.
Overview of the product's menu hierarchy and organization.
Steps and methods for controlling and adjusting settings via the OSD.
Adjusting image brightness, contrast, and color saturation levels.
Settings for hue, sharpness, and NTSC IRE values.
Controlling image position and phase for DVI Analog input.
Adjusting signal timing and automatic image calibration.
Selecting color temperatures and customizing RGB GAIN and BIAS values.
Copying color settings and adjusting black levels for colors.
Selecting marker types and displaying the center marker.
Adjusting safety area sizes and using the fit marker function.
Controlling marker darkness, line color, and thickness.
Setting positions for user-defined horizontal and vertical markers.
Designating functions for each pin of the RJ-45 REMOTE terminal.
List of functions that can be assigned to remote control pins.
Configuring Waveform/Vector display, intensity, transparency, size, and position.
Adjusting focus assist sensitivity and selecting its display color.
Selecting left and right embedded audio channels for output.
Setting up audio level meters, display methods, and reference levels.
Options for resetting settings and saving/loading user configurations.
Setting monitor ID, UMD display modes, and custom characters.
Enabling time code display and managing closed caption settings.
Adjusting backlight, dithering, and OSD display position.
How to select and configure analog input signals for the LVM-172W.
Steps for selecting DVI and SDI input signals on the LVM-172W.
How to select and configure analog input signals for the LVM-242W.
Steps for selecting SDI input signals on the LVM-242W.
Overview of specifications for 7-inch to 17-inch monitor models.
Overview of specifications for 24-inch monitor models.
Specifications for 32-inch and 40-inch monitor models.
Specifications for 46-inch and 57-inch monitor models.
ND filters, external filters, and rack-mountable kits for various display sizes.
Tripod ball heads, V-mounts, hoods, carrying cases, and rack mounting displays.
General| Panel Type | IPS |
|---|---|
| Aspect Ratio | 16:10 |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Viewing Angle | 178° (H) / 178° (V) |
| Screen Size | 24 inch |
| Color Gamut | 72% NTSC |
| Input Connectors | HDMI, DisplayPort, DVI-D |
| Resolution | 1920 x 1200 (WUXGA) |
To Next Page
