TVS electronics RP 3160 STAR - Environmental Requirements; Reliability; Certification

RP 3160 STAR User’s Manual
19
♣Important!
When using a printer power supply other than optional AC adaptor, be sure that the following cautions are
observed.
Use a power supply (Limited Power Supply) of DC 24V±10% and more than 1.75A.
Be careful about installing the printer in an area where there is noise.
Take the appropriate measure to protect against electrostatic AC line noise, etc.
9-5. Environmental Requirements
(1)Operating
Temperature 5°C to 40°C
Humidity 10% to 90% RH (without condensation)
(2)Transport/Storage (except paper)
Temperature -20°C to 60°C
Humidity 10% to 90% RH (without condensation)
9-6. Reliability
(1)MCBF 60 million lines (based on an average printing rate of 12.5% with paper
thickness in the range 65µm to 75µm)
35 million lines (based on an average printing rate of 12.5% with paper
thickness in the range 76µm to 150µm)
(2)Head Life 160Km
(3)Cutter Life 1.5 million cuttings (if the paper thickness is between 65 and 90µm)
9-7. Certification
(1)ENERGY STAR