TVS RAIDER - Page 29

23
5. Turn signal indicator lamp left ( )
Flashes when the left side turn signal indication is
activated.
6. ISG malfunction indicator ( )
ISG malfunction indicator will be turned ‘ON’ when
there is a fault in the ISG system.
If the ISG malfunction indicator is glowing continually
after the self check cycle of the speedometer,
immediately contact the nearest TVS Motor Company
Authorised Main Dealer / Authorised Dealer.
Please remember that the ‘TVS intelliGO’ system
will not work if the ISG malfunction indicator is
‘ON’.
7. High beam indicator lamp ( )
Glows when the headlamp high beam is activated.
8. Malfunction indicator lamp - MIL ( )
‘MIL’ will be turned ‘ON’ when the ECU detects a
fault in the system.
If the malfunction indicator lamp ‘ ‘ is glowing
continually even after the starting the engine,
immediately contact the nearest TVS Motor
Company Authorised Main Dealer / Authorised
Dealer. Please remember that the ‘TVS intelliGO’
system will not work if the MIL indicator is ‘ON’.
‘Menu’ and ‘Info’ switches
‘Menu switch’ is located at the right side of the
handle bar. ‘Menu switch’ is used to access the
connected instrument cluster’s display to various
options like Trip A, Trip B, Range, Average mileage,
Average speed and High speed.
‘Info switch’ is located at the left side of the handle
bar. ‘Info switch’ is used erase the stored value in
cluster / to accept or reject the incoming call alert /
voice assist invoking etc. (Refer page no. 32, 39
and 45 for details)