59
Park the motorcycle safely on a solid ground. On slopes,
engage the first gear and park the vehicle in such a way
that the front wheel faces uphill.
Always retract the side stand to its full up position
before moving the vehicle. Else, the vehicle will get
‘Switched OFF’.
Do not sit on the vehicle when it is parked on the side
stand / centre stand, as your full weight would rest on
the vehicle’s only support.
Ensure the proper seating of seat assembly in the frame
after reassembling.
SEAT
The seat lock is located at the rear end of the vehicle
bellow the tail lamp assembly.
Rear seat (passenger seat)
To remove the rear seat, insert the ignition key into
the seat lock and turn it in clockwise direction. Pull
and take out the rear seat by lifting it from the rear
end and gently tapping it on the front end and there
by accessing the tool kit and first aid kit. To install the
rear seat, reverse the removal procedure.
To Next Page
Loading...
