TVS StaR HLX 150 User Manual

ACCESSORY INSTALLATION AND SAFETY TIPS
Use extreme caution while selecting and installing the
accessories for your TVS StaR HLX 150.
The addition of unsuitable accessories can lead to unsafe
operating conditions. Your friendly dealer will assist you in
selecting quality accessories and installing them correctly.
While selecting the accessories, make sure the accessories
should not obstruct lighting, steerability and suspension
level.
Additional electrical equipments and controls should not
exceed the specified electrical system load of the vehicle.
EMISSION CONTROL
All the TVS motorcycles are tested in the factory for
optimum fuel efficiency and lowest possible CO levels.
Kindly do not disturb the Carburettor settings as this may
lead to higher fuel consumption and also higher CO
levels.
If the vehicle needs any adjustments, please consult nearest
TVS Motor Company Authorised Dealer or Authorised
Service Centre.
While adequate care is exercised at the factory to ensure
that the emissions are within the limits, it is essential for the
owner to always maintain TVS StaR HLX 150 motorcycle in
good condition by getting it periodically serviced and
checked by TVS Motor Company Authorised Dealer or
Authorised Service Centre so that the emission and fuel
consumption levels are maintained as per norms.
SAFE RIDING TIPS
SAFE RIDING TIPS
6

TVS StaR HLX 150 Specifications

General

Fuel System	Carburetor
Brakes (Rear)	Drum
Seat Height	800 mm
Engine Type	4-Stroke
Front Suspension	Telescopic
Rear Suspension	Hydraulic Shock Absorber