Safety Warning:
1. When using the machine for the first time, please make sure that the machine installation is firm.
2. When danger occurs, press the emergency stop button quickly.
3. Wear safety glasses when operating the machine.
4. Please use a brush to remove debris, do not blow with your mouth.
5. Be careful with sharpness when using Milling tools or sanding workpieces.
6. Install Milling tools, make sure it is solid.
7. When loading and unloading, setting knife, measuring and cleaning, please make sure that the machine must be stopped before operation.
8. Do not wear cotton gloves during operation.
9. Do not place measuring tools or other sundries within the scope of the workbench.
10. Clamp the workpiece firmly, do not start engraving when it cannot be loosened or not clamped.
To Next Page
Loading...
