TWO TREES TTS-20 PRO User Manual

Note:The picture is for reference only,the actual product shall prevail
PRODUCT MANUAL
3051003
TEL: +0086-0755-23987110
Http: www.twotrees3d.com
E-mail: service@twotrees3d.com
Facebook: https://www.facebook.com/twotrees3d
Address: Room 402, Building 11, No.9 Qilin Road, Nankeng Community,
Bantian Street, Longgang District, Shenzhen, Guangdong, China, 518000
TTS memory card short link: https://bit.ly/3yQAJyt
Youtube channel short link: https://reurl.cc/VjQa1n

TWO TREES TTS-20 PRO Specifications

General

Laser Type	Diode Laser
Laser Power	20W
Engraving Speed	10000 mm/min
Engraving Accuracy	0.01mm
Interface	USB
Compatible Software	LaserGRBL, LightBurn
Cooling System	Air Cooling
Laser Wavelength	455nm
Working Area	400x400mm
Focusing Method	Fixed Focus
File Format	BMP, JPG, PNG
Power Input	100-240V 50/60Hz
Operating System	Windows, Mac, Linux
Supported Materials	Wood, Plastic, Leather, Paper, Fabric, Bamboo
Connection	USB

Summary

Letter from TwoTrees

Precautions

Laser Operation Safety

Covers eye safety, direct touching, fire hazards, and user restrictions during operation.

Material & Equipment Handling

Advises against reflective materials, warns about maintenance and crushing hazards.

User Responsibility & Guidelines

Emphasizes user responsibility, protective eyewear, and proper power management.

Safety Guidelines

General Safety Warnings and Responsibilities

Details material limitations, speed, consumable parts, handling, static damage, and user obligations.

Main Parameters

Assembling the Machine

Component Installation

Covers installing the master control box and bellows mounts on the machine frame.

Assembling the Machine

Component Installation

Covers installing the X-axis end stop and the laser module onto the machine.

Set Up TTS-20 PRO

Alignment and Fixing

Details bellows fixing and adjusting X-axis parallelism for proper operation.

Set Up TTS-20 PRO

Timing Belt and Focus Adjustment

Guides on adjusting timing belts and setting the correct laser focus.

Machine Wiring

Honeycomb Panel Introduction

Honeycomb Panel Usage

Explains using honeycomb pins for material support and applying non-slip sheets.

Meet Your TTS-20 PRO

Machine Component Overview

Covers machine introduction, air hose fitting, and motherboard component identification.

How to Start?

Initial Setup Steps

Covers assembling, installing software/drivers, and connecting the machine to the computer.

Connect PC

Detailed Connection Procedure

Provides step-by-step instructions for connecting the machine to the computer.

GRBL Introduction

Software and Installation

Guides on downloading and installing the LaserGRBL software.

Configuration Options

Details how to change software language and load engraving files.

GRBL Introduction

Engraving Parameter Settings

Covers setting picture parameters, engraving mode, quality, speed, energy, and size.

Save GCODE File

Instructions on how to save the configured engraving file.

Reference of Materials

Test Before Use

Pre-Operation Checks

Covers initial setup, movement, laser emission, and TF card file tests.

Safety and Maintenance Notes

Includes laser heat/glare safety, edge finding, and laser head lens maintenance.

App Connection

App Connectivity Steps

Guides on Wi-Fi connection, mobile app setup, and file upload via TF card.

After-Sales Service

Warranty and Claims Policy

Details warranty period, policies for parts, and reporting shipping issues.