Need help?Do you have a question about the TWO TREES TTC 450 and is the answer not in the manual?
Detailed steps for assembling the machine's frame structure, ensuring stability.
Instructions for mounting the engraving platform onto the assembled frame.
Procedure for installing the Y-axis assemblies and securing them with screws.
Guidance on attaching the X-axis stepper motor and coupling sleeve.
Initial steps for installing the X-axis assembly, focusing on orientation.
Completing the X-axis installation by securing it with screws and coupling.
Steps for mounting the Z-axis assembly, including screw adjustments.
Procedure for installing the X-axis limit switch and T-nut.
Mounting the X-axis limit trigger plates using screws and T-nuts.
Installing the Y-axis limit switches and securing them with screws.
Steps for correctly installing the drag chain for cable management.
Procedure for mounting the control box using screws and fixing pieces.
Connecting limit switches, attaching drag chain to guard, and securing components.
Securing the Y-axis guard plate with screws for stability and functionality.
Guiding Y-axis motor wire and securing with profile seals.
Introducing motor cable to X-axis stepper motor and securing wire harness.
Connecting the touch screen cable and mounting the panel with screws.
Installing the 775 spindle motor and motor chuck, and connecting cables.
Procedures for power-on, button verification, and spindle engagement.
Guide to initiating engraving via the TS35 touchscreen interface.
Instructions for engraving operations using a computer and software.
Connecting the machine to the computer using Candle control software.
Verifying the correct movement direction of machine axes via software commands.
Overview of the Grblcontrol software interface and its basic functions.
Setting the starting position and clearing coordinates for engraving tasks.
General| Working Area | 450 x 450 mm |
|---|---|
| Engraving Accuracy | 0.01 mm |
| Software | LaserGRBL, LightBurn |
| Focus Adjustment | Manual |
| Connectivity | USB, Offline |
| Focal Spot Size | 0.08*0.08mm |
| File Format | BMP, JPG, PNG, DXF |
| Input Voltage | 100-240V |
| Output Voltage | DC24V |
| Supported Materials | Wood, Plastic, Leather, Paper, Acrylic |
To Next Page
