20
12. Control Box Installation
Required parts:
• 2× M3X5 Screws
• 2× M5X6 Screws
• 2× T-nut 20-M5
• 2× Mainboard Fixing Piece
• 2,0 Hexagonal Wrench
• 3,0 Hexagonal Wrench
Begin by threading the M5X6 screw through the motherboard fixing piece and
subsequently into the T-nut.
Place it within the profile slot and give it a gentle tightening. Initially secure the M3X5
screw, and then proceed to fully tighten the M5X6 screw.
To Next Page
Loading...
