TWO TREES TTC 450 - Assembly of TTC450; Frame Installation

9
Assembly of TTC450
1. Frame Installation
Required parts:
• 1× 2020 Front Crossbeam
• 1× 2020 Rear Crossmember
• 2× 2020 Bottom Crossmember
• 1× 2040 Bottom Crossmember
• 4× Rubber Feet
• 8× M5X30 Screws
• 4× M4X25 Screws
• 2,5 Hexagonal Wrench
• 3,0 Hexagonal Wrench
When placing the frame, ensure that the profile
plane is oriented upwards, and be mindful of the
alignment of the 2020 profile on the left side.