TWO TREES TTS-20 PRO - Main Parameters; Assembling the Machine; Component Installation

02 03
MAIN PARAMETERS
Model
Machine Size
Machine Weight
Engraving Size
Laser Wavelength
Engraving Accuracy
Advice for engraving speed
Software Support System
Material
Electrical Requirement
Motherboard
Laser Power
File Format
Supported Software
Power Type
Software Support Languages
Working Environment
Engraving Method
Engraving Materials
Engraving Mode
TTS-20 PRO
695*620*125 mm
3.2 kg
418*418 mm
450±5 nm
0.1 mm
10000mm / min
Mac, Windows
Aluminum Profile + Plastic Parts
24V 4A DC
32bit
C20000mW
NC,BMP,JPG,PNG,GCODE,ETC
LaserGRBL (Windows), Lightburn (Common)
USA / EU Plug (Optional)
Chinese, English, Italian, French, German
RHTemperature 5-40℃, Humidity 20-60%RH
USB Connect PC, TF Card (APP, Webpage control)
Wood, Plastic, Paper, Leather, Sponge Paper, Alumina
Image carving / Text carving / Scanning carving /
Contour carving / Pixel carving
EN
ASSEMBLING THE MACHINE
Installation of master control box
Installation of bellows mounts
Master Control Box
(Port facing up)
M3 X 6Bellows Mounts
EN
ASSEMBLING THE MACHINE
M3 X 20
ASSEMBLING THE MACHINE
Installation of master control box
Installation of bellows mounts
Master Control Box
(Port facing up)
Installation of bellows mounts
EN
ASSEMBLING THE MACHINE
Installation of master control box
M3 X 20
03
M3 X 6
Bellows Mounts
Bellows Mounts