TWO TREES TTC450 - TTC450 Setup Guide; Frame and Platform Assembly

6
Step 1
-2020 front crossbeam*1
-2020 rear crossmember*1
-2020 bottom crossmember*2
-2040 bottom crossmember*1
-Rubber feet*4
-M5X30 screws*8
-M4X25 screws*4
-2.5 hexagonal wrench
-3.0 hexagonal wrench
Required parts
When the frame is installed with the profile plane facing upwards,
pay attention to the direction of the left side 2020 profile.
Frame Installation
TTC450
Set up TTC450