Need help?Do you have a question about the Twose TE480 and is the answer not in the manual?
Steps for dealers to register machines for warranty.
Torque specifications for hydraulic hose and port connections.
Details on warranty coverage duration and exclusions.
Steps for submitting and processing warranty claims.
Defines the extent of the manufacturer's responsibilities.
Information on personal noise exposure levels at the operator's ear.
Explains key terms used in the manual for clarity.
Defines how left and right are referenced for the machine.
Lists the primary features and capabilities of the TE480.
Identifies significant hazards and risks associated with the machine.
Essential safety measures to perform before using the machine.
Lists conditions and situations where operation is prohibited.
Describes the construction and features of Twose flail trimmers.
Details the various types of cutting blades available.
Specifies minimum tractor power, weight, and PTO standards.
Guidelines for essential operator and tractor guarding.
Lists compatible hydraulic oils for different climate conditions.
Crucial advice on using and mixing hydraulic oils.
Step-by-step instructions for attaching the machine with a chain stabilizer.
Critical safety steps regarding engine and brake engagement.
Step-by-step instructions for attaching the machine with a link stabilizer.
Procedure for measuring and cutting the PTO shaft to correct length.
Guidance on selecting rotor direction for optimal cutting.
Recommendations and warnings for downward cutting operations.
Highlights essential safety warnings for rotor use.
Explains the operation of the rotor control levers and settings.
Critical safety advice when changing rotor cut direction.
How to operate the lift function using the control lever.
How to operate the reach function using the control lever.
How to operate the angle function using the control lever.
Proper methods for lowering and positioning the cutting head.
Procedures for maintaining the cutting head, blades, and belts.
Safety steps for removing obstacles entangled in the flailhead.
Step-by-step guide for adjusting the cutting head 'vee' belts.
Important reminder for regular belt tension verification.
Detailed instructions for replacing the cutting head 'vee' belts.
Steps for safely removing the rotor assembly.
Steps for safely reinstalling the rotor assembly.
Method for altering the cutting height via roller position.
Clarifies when the flail head roller is typically employed.
Specifies daily lubrication points and pre-use greasing.
Details on gearbox oil type, capacity, and recommended service intervals.
Routine checks to be performed daily and weekly.
Service tasks required at specific hourly and annual intervals.
Procedures for checking oil condition and replacement.
Maintenance of filters, strainers, and tank breathers.
Instructions for replacing hydraulic hoses and ensuring proper routing.
Recommended torque settings for hose connections.
Safety precautions for working with hydraulic hoses.
How control cables function and general maintenance.
Explicit warning against lubricating the control cables.
Step-by-step guide for lubricating the PTO shaft and its components.
Torque settings for imperial fasteners based on grade.
Torque settings for metric fasteners based on grade.
To Next Page
General