10
INTRODUCTION
The Twose range of Boom Flail Trimmers has been designed with both the farmer and the
contractor in mind - which has resulted in a boom flail with a very high specification -
with many features not found on other machines.
The construction is of welded steel fabricated assemblies - with many and varied options
available covering such things as controls, hydraulics, heads, booms etc. The cutting head
is of a ‘double skin’ construction.
The cutting flail blades offered for your Twose machines are: -
a) Heavy, double edged design (one piece).
- For ‘Upward’ or ‘Downward’ cutting.
- Suitable for all types of conditions and growth.
b) Back to Back ‘rigid’ one piece blade (in pairs).
- For ‘Upward’ or ‘Downward’ cutting.
- Suitable for grass/mowing and trimming.
Illustration shows both a single blade and pair of blades back to back.
c) Heavy single edge blade flail (twisted pattern).
- Cuts one direction only.
- For grass cutting and hedge trimming.
d) Back to Back - on shackle (in pairs).
- For ‘Upward’ or ‘Downward’ cutting.
- Suitable for grass/mowing.
e) Boot flail - on shackle.
- Cuts one direction only.
- For grass cutting and hedge trimming.
To Next Page
Loading...