Twose TE480 - Hydraulic System Fluids; Recommended Hydraulic Oils; Hydraulic Oil Handling Warnings

13
HYDRAULIC OIL
IMPORTANT
The hydraulic system will have been 'run-up' and checked at the factory prior to the
machines despatch, where 'Texaco Rando 46' hydraulic oil is used - and is recommended
for the machine.
The hydraulic tank will have oil in it when delivered.
Oil tank capacity for the TE480 is 150 Litres
The user must ensure the hydraulic tank is full of 'RANDO 46' hydraulic oil (or an
equivalent recommended oil – refer to oil chart below) before attempting to start the
machine from new.
Recommended Oils
Manufacturer Cold or Temperate Climate Hot Climate
BP
Bartran 46
Energol HLP-HM 46
Bartran 68
Energol HLP-HM 68
CASTROL
Hyspin AWH-M 46 Hyspin AWH-M 68
COMMA
Hydraulic Oil LIC 15 Hydraulic Oil LIC 20
ELF
Hydrelf HV 46
Hydrelf XV 46
Hydrelf HV 68
ESSO
Univis N 46 Univis N 68
FUCHS
(UK/Non UK markets*)
Renolin 46
Renolin HVZ 46
Renolin CL46/B15*
Renolin AF46/ZAF46B*
Renolin 68
Renolin HVZ 68
Renolin CL68/B20*
Renolin AF68/ZAF68B*
GREENWAY
Excelpower HY 68 Excelpower HY 68
MILLERS
Millmax 46
Millmax HV 46
Millmax 68
Millmax HV 68
MORRIS
Liquimatic 5
Liquimatic HV 46
Triad 46
Liquimatic 6
Liquimatic HV 68
Triad 68
SHELL
Tellus 46
Tellus T46
Tellus 68
Tellus T68
TEXACO
RandoHD 46
Rando HDZ 46
Rando HD 68
Rando HDZ 68
TOTAL
Equivis ZS 46 Equivis ZS 68
The tank top filter/breather is equipped with a strainer to ensure all oil is strained when
being put into tank. The strainer basket - should never be removed, all hydraulic oil filling
is to be done through the strainer.
WARNING
Never mix hydraulic oils - if another supplier’s oil is to be used ensure it is suitably
compatible oil - Check with your oil supplier or machine manufacturer first.