TFP802
Page 6 of 6
NATIONAL FIRE PROTECTION ASSOCIATION and NFPA are registered trademarks of National Fire Protection Association
1400 Pennbrook Parkway, Lansdale, PA 19446 | Telephone +1-215-362-0700
© 2022 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revision date and are subject to change without notice.
Limited
Warranty
For warranty terms and conditions, visit
www.tyco-fire.com.
Ordering
Procedure
Contact your local distributor for avail-
ability. When placing an order, indicate
the full product name and Part Number
(P/N).
D3 PROTECTOSPRAY Nozzles
Specify: No. (orifice), Type D3 PRO-
TECTOSPRAY Nozzle with (finish/
coating and material) with (number)
degree spray angle, P/N (from table E)
Sprinkler Wrench
Specify: W-Type 11 Sprinkler Wrench,
P/N 56 -452-1-001
Optional Blow-Off Plugs
Specify: Blow-Off Plug Style (letter),
P/N (specify):
(No.16) Style A .............. 56-320-1-001
(No.18) Style K .............. 56-320 -1- 00 9
(No.21) Style J ............... 56-320-1-008
(No.24) Style I ............... 56-320 -1-0 07
(No.28) Style H .............. 56 -320 -1- 00 6
(No.32) Style E .............. 56-320 -1- 005
(No.34) Style D .............. 56 -320-1-004
P/N* 49 — 3XX — X — XXX
ORIFICE SIZE
16 NO. 16
18 NO. 18
21 NO. 21
24 NO. 24
28 NO. 28
32 NO. 32
34 NO. 34
FINISH & MATERIAL
1 NATURAL FINISH BRONZE
4 TEFLON COATED BRONZE
7 LEAD COATED BRONZE
9 CHROME PLATED BRONZE
0 NATURAL FINISH STAINLESS STEEL
SPRAY ANGLE
065 65°
080 80°
095 95°
110 110°
125 125°
140 140°
160 160°
180 180°
* Use Sufx “I” for the ISO 7-1 connection;
for example, 49 -321-1-110 -I
TABLE E
TYPE D3 PROTECTOSPRAY NOZZLES
PART NUMBER SELECTION
To Previous Page
Loading...