EasyManuals Logo

Tylo PURE User Manual

Tylo PURE
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
4
Start
To start the sauna, press (C). The last temperature setting and operating time will be used. The symbol
will light in the indicator eld to show that the heater has started.
To switch o󰀨 the sauna before the end of the operating time set, press the same button again.
Setting temperature
Use the function selection buttons (F) to select temperature setting. Use the - and + buttons to then
select temperature setting 1-10. The temperature obtained depends on the max. temperature set, i.e.
which program has been set. Temperature can be adjusted whilst taking a sauna if required.
Max. temperature
Set temperature (approx. value, °C)
1 2 3 4 5 6 7 8 9 10
90 °C 60 63 67 70 73 77 80 83 87 90
194 °F 140 145 153 158 163 171 176 181 189 194
Once the temperature has been set and the heater started, the set temperature will be indicated con-
tinuously and actual temperature will be indicated by a ashing indicator. Once the actual temperature
reaches the set value, the ashing will stop.
Setting delayed start
You can set a time when the heater is to start after a certain time. Use the function selection buttons (F)
to select the timer symbol. Use the – and + buttons to select the number of hours until the heater is to
start (1-10 hours). Activate delayed start by pressing the Start button (C).
The indicator symbol for delayed start will light (eld B) and the time delay LED will start to ash. The
ashing indicator will count down and show the actual time remaining until the heater starts. Once the
heater starts, the panel will switch to showing set temperature automatically.
Setting sauna time
Sauna time is set when the heater is OFF. Use the function selection buttons (F) to select operating time
setting. Use the - and + buttons to then select operating time 1-10. Operating time depends on the max.
operating time set, i.e. which program has been set.
24 hour operation is for commercial applications only with attendants on site to routinely check the
sauna.
Version
LED indicators
1 2 3 4 5 6 7 8 9 10
1 h 6 min 12 min 18 min 24 min 30 min 36 min 42 min 48 min 54 min 1 h
24 h 2 h 4 h 6 h 8 h 10 h 12 h 14 h 16 h 18 h 24 h

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tylo PURE and is the answer not in the manual?

Tylo PURE Specifications

General IconGeneral
BrandTylo
ModelPURE
CategoryControl Panel
LanguageEnglish

Related product manuals