Connect drainage pipe and water intake pipe
Warning:1)The machine can only connect with drinking water sources,and must meet local
drinking water standards
2)The water pressure must be in 14.5-58psi,if exceed 58psi,a pressure reducing
valve must be connected.
3) Drainage:The outlet of the drainage pipe must be lower than the outlet on the
machine
If you have questions about the connection, we can send the tutorial video to guide
you, please contact: support@itylza.com, phone number is +1(213)352-5535
Drain.
Warning: Because the ice in the inner tank will melt, drain pipe must be connected before
using, and insert the drain pipe into a container or into the sewer.
Note: Connect one end of the drain pipe to the machine, and the other end to a container or
sewer. The other port of the drain pipe must be lower than the drain port of the machine.
To Next Page
Loading...