GREASING POINTS
For general greasing points, refer
to the fuel, oil and fluid specification
chart. (See page 5-22.)
However, add grease before work
if the tractor is to be used in a wet
field.
GREASING BRAKE ARM
Remove the rubber caps on the
floor and dash panel to access to
the grease nipple.
Add grease with the supplied grease
gun.
►
►
8. GREASING 9. CHECKING HOSES
Rubber parts, such as the fuel hose
and radiator hose, are aged by time
even when the tractor is not in use.
Therefore, such parts should be
replaced with their tightening bands
every 2 years or when they are
damaged.
If any fuel hose is damaged,
fuel leaks and it can catch re.
Make sure to check the fuel
hose and take a necessary ac-
tion.
•
WARNING
To Next Page
Loading...
