11-12
SECTION 2.TIGHTENING AND STARTING TORQUE SPECIFIED FOR MAJOR PARTS
1. 3510/4110/T390/T430
16.0 ∼ 18.0
9.0 ∼ 11.0
13.0 ∼ 15.0
9.0 ∼ 11.0
2.0 ∼ 2.4
5.5 ∼ 7.0
16.0 ∼ 18.0
1.3 ∼ 1.8
1.3 ∼ 1.8
1.3 ∼ 1.8
M 16 (7T)
M 12 (7T)
M 14 (7T)
M 12 (7T)
M 18 (7T)
M 110 (7T)
M 16 (7T)
M 8
M 8
M 8
1)Front axle housing (4WD type)
①Axle bracket ∼ Engine tightening bolts
②Front pivot metal(support)tightening bolts
③Rear pivot metal(support) tightening bolts
④Front axle∼final case tightening bolts.
⑤Bearing cover tightening bolts.
⑥Wheel shaft cover tightening bolts.
⑦Front wheel tightening bolts.
⑧Bevel gear case tightening bolts
⑨Dif-metal(support) tightening bolts
⑩Ring gear∼dif metal(support)tightening bolts
Bevel pinion lock nut
9.0 ∼ 11.0
9.0 ∼ 11.0
9.0 ∼ 11.0
9.0 ∼ 11.0
5.5 ∼ 7.0
5.5 ∼ 7.0
9.0 ∼ 11.0
M 12 (7T)
M 12 (7T)
M 12 (7T)
M 12 (7T)
M 10 (7T)
M 12
M 12 (7T)
2)Transmission
①Front transmission∼Engine tightening bolts and nuts
②Front transmission Spacer transmission
tightening bolts and nuts
③Space transmission∼Rear transmission
tightening bolts and nuts
④Input metal(support)tightening bolts and nuts.
⑤Drive pinion metal(support) tightening bolts.
Drive pinion tightening nut
⑥Dif-case metal(support)tightening bolts.
⑦Dif case∼ring gear tightening nuts.
Tightening torque
(㎏f·m)
Bolt and Nut
(Hardness)
TIGHTENING PARTS
To Next Page
