3 - 38
► FUEL GAUGE.
To avoid excessive condensation in the fuel
tank rell at the end of each day’s work and
ensure during the day that it does not drop to
a low level where the fuel system will require
bleeding to expel air in the system after rell-
ing the tank.
► ENGINE COOLING WATER.
If the gauge indicates that the engine is run-
ning hot, stop the tractor and check the cool-
ant in the radiator.
► TRAILER SOCKET (Seven
Terminal Electrical Socket type)
To operate the Electrical systems of imple-
ments, trailer lighting, warning lamp etc.
Allow the engine to cool
down before opening ra-
diator cap as serious burns
may result due to hot steam
& boiling water.
Danger
Also check to ensure that the ns in the radia-
tor core are not clogged or that the tractor has
a broken or stretched fan belt.
When traveling on public
or farm roads connect both
brake pedals and allow for
the weight of any mounted
implement to ensure that
the unit is not unbalanced.
Also allow for the width
when passing other road
users. Where tted use the
hazard lights provided.
Strictly follow the local
trafc regulations.
Caution
When operating near oth-
ers with an implement at-
tached take particular care
to allow for the width of
the implement and avoid
accidents.
Caution