TYM T603 - PTO Operation and Gear Selection; Hydraulic System Operation

PTO GEAR SELECTION LEVER
Your tractor is equipped with 2 Speed PTO to suit range
of applications and conditions.
Always use the clutch when engaging or disengaging the PTO or changing PTO
speed. Let the PTO driven implement come to a complete stop before changing.
MODEL
POSITION
1st 2nd 3rd
T603 540 1000 (750)
important
Danger
Ensure that the tilt pedal has locked before moving the tractor.
45
Do not operate any implement at a high speed than is specified for it.
When making adjustments to the implement stop the engine to avoid serious injury.
When leaving the tractor stop the engine, and remove the key. Set the parking brake.
To raise the implement: Pull the lever back
To lower the implement: Push the lever forward.
Caution
Operating the hydraulics.
The hydraulics are powered with an engine driven hydraulic pump and controlled with a
position control lever mounted beside the driver.
Position control
▶ implements can be raised and lowered with
the hydraulic position control lever and can be
stopped at any position by stopping the lever.
To ensure a consistent working depth the adjustable
stop can be set to ensure that the implement returns
to the same depth every time.