Need help?Do you have a question about the TYMCO 600 2008 and is the answer not in the manual?
Details the operational capabilities and design of the TYMCO sweeper.
Lists daily pre-operation checks for the sweeper.
Step-by-step guide for starting the sweeper.
Step-by-step guide for safely shutting down the sweeper.
Daily cleaning procedures for the sweeper.
Guidelines for properly parking the sweeper.
Details the machine's operational capabilities and design within the air system context.
Identifies and describes the components of the control console.
Procedures for dumping debris and cleaning the hopper.
Details service requirements for the hopper assembly.
Explains how to operate the blower.
Recommends engine RPM settings for different debris types.
Recommends MPH speeds for efficient sweeping.
Outlines periodic maintenance for the blower assembly.
Location, capacity, and checking of the hydraulic reservoir.
Information about the hydraulic pump.
Explanation of the hydraulic control valve assembly.
Procedures for servicing hydraulic control valves.
Instructions for adjusting gutter broom spring tension and tilt.
Step-by-step guide for replacing gutter broom bristles.
Maintenance procedures for the gutter broom's torque motor shaft and shoulder plate.
Explains how the pick-up head functions during sweeping.
Importance and replacement of pick-up head curtains.
Details adjustments for blast orifice, skid plates, and springs.
Explains when and how to operate the pressure bleeder.
How to operate the water system for dust control.
Service procedures for the water tank, pre-filter, pump, and nozzles.
Procedures for using the optional hand hose attachment.
Explains the ASI system for interrupting sweeping to back up.
Outlines the terms and conditions of the sweeper warranty.
To Next Page
General