EasyManua.ls Logo

TypeS POWERGEN 500 - Personal Precautions

TypeS POWERGEN 500
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
k) The device shall be stored indoors and protected from the elements;
l) The unit shall not be charged outdoors;
m) When in use, steps should be taken to reduce the exposure to rain, sleet, snow, and the like.
n) PERSONAL PRECAUTIONS
1) Consider having someone close enough by to come to your aid when you work near a lead-acid battery.
2) Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing, or eyes.
3) Wear complete eye protection and clothing protection. Avoid touching eyes while working with battery.
4) If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters
eye,immediatelyoodeyewithrunningcoldwaterforatleast10minutesandgetmedical
attention immediately.
5) NEVERsmokeorallowasparkoramewithinthevicinityofbatteryorengine.
6) Be extra cautious to reduce risk of dropping a metal tool onto battery. It might spark or short
circuit the battery or other electrical part that may cause explosion.
7) Remove personal metal items such as rings, bracelets, necklaces, and watches when working
with a lead-acid battery. A lead-acid battery can produce a short-circuit current high enough to
weld a ring or the like to metal, causing a severe burn.
o) When charging the internal battery, work in a well-ventilated area and do not restrict ventilation
in any way.
p) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentallyoccurs,ushwithwater.Ifliquidcontactseyes,additionallyseekmedicalhelp.
Liquid ejected from the battery may cause irritation or burns.
q)Donotexposeapowerstationtoreorexcessivetemperature.Exposuretoreor
temperature above 266°F (130°C) may cause explosion.
r)Haveservicingperformedbyaqualiedrepairpersonusingonlyidenticalreplacementparts.
This will ensure that the safety of the product is maintained.
s) Attach output cables to a battery as indicated. Never allow the output clamps to touch one
another.
t) Dropping, hitting, or other excessive amounts of force to the power station may damage the
unit (external and internal), which may result in loss of operation, electrical fre, or cause other
serious damage.
SAVE THESE INSTRUCTIONS