• If you have trouble connecting with your Typhoon™ Speaker,
go into your Bluetooth® settings and forget
TYPHOON_SPK_CAT3. Make sure the speaker is fully
charged. Ensure volume is up on your speaker and
transmitting device. Make sure your speaker is not connected
to another device. Shorten the distance between your
Typhoon™ speaker and the transmitting device. Repeat
“Connecting to an Audio Device” steps stated previously.
Typhoon™ speaker automatically powers off when not in use
for a long period of time.
TROUBLESHOOTING TECHNIQUES:
• To enter demo mode, press the power button three times
and the speaker will audibly say “In Demo Mode”.
• To exit demo mode, press the power button again three times
and the speaker will audibly say “Exiting Demo Mode”.
To Next Page
Loading...