• Fully charge for 2 hours before first use. The average run
time per full charge is about 6 hours (varies depending on
volume level).
• Connect one end of the charging cable to the micro USB C
port on the back side of your speaker under the port
protection flap (port protection flap should remain closed at
all times other than when charging).
• Connect the other end to a USB C port on your computer or
wall adapter (not included). The LED indicator light is solid
red while charging and will turn o when charging is
complete. Note: The speaker will audibly notify you when the
battery is low. You can also check the battery percentage on
some devices.
CHARGING YOUR TYPHOON™ SPEAKER:
• DO NOT PLACE IN DISHWASHER. HAND WASH ONLY.
• While your speaker is IP67 waterproof, we recommend
using a damp cloth to clean your speaker by hand to extend
the life of your speaker.
CLEANING YOUR TYPHOON™ SPEAKER:
To Next Page
Loading...