• Connect your Bluetooth® device to your primary
speaker as described in the previous instructions
page “Connecting to an Audio Device”. Make sure
the second speaker is powered o during this step.
• While in close proximity to the primary speaker,
power on the second speaker and tap the link symbol.
The speaker will then say “Typhoons connected”. The
two Typhoon™ speakers are now paired and your
speakers are now in stereo mode.
• If having trouble, ensure both speakers are not
connected to another device by “forgetting the device”
in your settings.
• To disconnect from stereo mode, simply tap the link
symbol on the back of either speaker to disconnect.
PAIRING A SECOND TYPHOON™ SPEAKER
(STEREO SOUND):
To Next Page