EN – 36
2. Now, thread the short Velcro® straps with the stoppers through the narrow
strap clamps at the back of the PABLO® Multiball. Make sure the Velcro®
fastener faces upwards. The stoppers prevent the short Velcro® straps from
slipping off the strap clamps when unfastened.
3. Now, thread the long Velcro® straps through the wide strap clamps at the front
of the PABLO® Multiball. Make sure the Velcro® fastener faces upwards.
Figure 22: Threading the long straps at the front
4. Now, thread the wide strap through the wide strap clamp at the front of the
PABLO® Multiball. Make sure the Velcro® fastener faces upwards.
To Next Page
