Tyromotion PABLO - Page 44

EN – 44
2. Place the hand in the wrist strap and close the Velcro® fasteners on both sides
of the PABLO® Handsensor.
Figure 30: For fixation of the hand, attach the wrist strap to the PABLO®
Handsensor
Attaching the PABLO® Multiball
Proceed as follows when attaching the hand to the PABLO® Multiball.
1. Place the hand on the PABLO® Multiball and fixate the hand with the straps as
follows.
Figure 31: For fixation of the hand, attach the strap to the PABLO® Multiball
2. If needed, you can also fixate the thumb using the long Velcro® strap.