To Next PageTo Next Page
Need help?Do you have a question about the u-blox NINA-B4 Series and is the answer not in the manual?
General| Brand | u-blox |
|---|---|
| Model | NINA-B4 Series |
| Category | Wireless modules |
| Language | English |
Provides a general introduction to the NINA-B4 series Bluetooth modules.
Illustrates the internal architecture of NINA-B40 and NINA-B41 modules.
Details the NINA-B40 open-CPU module design, including antenna options.
Details the NINA-B41 u-connect module design, including antenna options.
Summarizes key technical specifications for NINA-B40 and NINA-B41 series modules.
Lists detailed characteristics for NINA-B400, NINA-B401, and NINA-B406 models.
Lists detailed characteristics for NINA-B410, NINA-B411, and NINA-B416 models.
Explains the software components and architecture for NINA-B40 and NINA-B41 modules.
Details connectivity and application support for NINA-B40 using the Nordic SDK.
Describes the features and interface for NINA-B41 u-connectXpress software.
Details the pin assignments and functions for NINA-B40 and NINA-B41 modules.
Shows the pin layout and multiplexing for NINA-B40 open CPU modules.
Shows the pin layout and fixed pin multiplexing for NINA-B41 modules.
Explains the sources for the low power clock and their impact on sleep modes.
Covers main supply input, I/O voltage, and application circuit options.
Describes the integrated DC/DC converter for stable supply voltage.
Details power supply options like SMPS, LDO, and battery for NINA-B4 modules.
Guides on selecting and placing antennas for optimal RF performance.
Recommendations for selecting and designing with external antennas.
Layout considerations for optimal performance of the NINA-B4x6 internal antenna.
Details SWD and Serial Wire Viewer support for debugging NINA-B40x modules.
Best practices for schematic and PCB layout to ensure optimal performance.
Considerations for schematic design and PCB layout for NINA-B4 series.
Guidelines for module placement, bypass capacitors, and signal routing.
Requirements and recommendations for Electrostatic Discharge (ESD) immunity.
Describes production testing procedures for NINA-B4 modules.
Focuses on OEM testing of end-product applications, including 'Go/No go' tests.
Introduction to the Nordic SDK for developing applications on NINA-B40.
Steps to set up the Nordic Semiconductor toolchain and examples for NINA-B4.
Information on reading and writing the unique Bluetooth MAC address.
Methods for flashing open CPU software onto NINA-B40 modules.
Procedure for flashing software using the Serial Wire Debug interface.
Procedure for flashing software using the UART interface and DFU package.
Methods to reflash the u-connectXpress software on NINA-B41 modules.
Instructions for updating NINA-B41 firmware using the u-blox s-center client.
Instructions for updating NINA-B41 firmware using AT commands over UART.
Guidelines for handling ESD-sensitive NINA-B4 modules and patch antennas.
Details the recommended reflow soldering process and cleaning for NINA-B4 modules.
Specifies parameters for the industrial reflow profile for RoHS solders.
Defines abbreviations and technical terms used in the NINA-B4 series manual.
