NINA-B4 series - System integration manual
UBX-19052230 - R06 Document information Page 2 of 45
C1-Public
Document information
Title
NINA-B4 series
Subtitle Stand-alone Bluetooth 5.1 low energy modules
Document type
System integration manual
Document number
UBX-19052230
Revision and date R06 22-Jan-2021
Disclosure restriction C1-Public
Document status Description
Functional sample Draft For functional testing. Revised and supplementary data will be published later.
In development /
Prototype
Objective specification Target values. Revised and supplementary data will be published later.
Engineering sample Advance information Data based on early testing. Revised and supplementary data will be published later.
Initial production Early production information Data from product verification. Revised and supplementary data may be published later.
Mass production /
End of life
Production information Document contains the final product specification.
This document applies to the following products:
Product name Document status
NINA-B400 Early Production Information
NINA-B401 Prototype
NINA-B406 Early Production Information
NINA-B410 Early Production Information
NINA-B411 Prototype
NINA-B416 Early Production Information
☞ For information about the related hardware, software, and status of listed product types, refer to
the respective data sheets [2][3].
u-blox or third parties may hold intellectual property rights in the products, names, logos and designs included in this
document. Copying, reproduction, modification or disclosure to third
parties of this document or any part thereof is only
permitted with the express written permission of u
-blox.
The information contained herein is provided “as is” and u
-blox assumes no liability for its use. No warranty, either express or
, including but not limited to, with respect to the accuracy, correctness, reliability and fitness for a particular
purpose of the information. This document may be revised by u
-blox at any time without notice. For the most recent
-blox.com.
-blox AG.
u-blox or third parties may hold intellectual property rights in the products, names, logos and designs included in this
document. Copying, reproduction, modification or disclosure to third parties of this document or any part
thereof is only
permitted with the express written permission of u
-blox.
The information contained herein is provided “as is” and u
-blox assumes no liability for its use. No warranty, either express or
implied, is given, including but not limited
to, with respect to the accuracy, correctness, reliability and fitness for a particular
purpose of the information. This document may be revised by u
-blox at any time without notice. For the most recent
-blox.com.
-blox AG.