Why does the interior light not illuminate in my U-Line Refrigerator?
If the interior light in your U-Line Refrigerator isn't working, the light bulb might be defective. If the unit is cooling, it could also be in Sabbath mode.
Why is my U-Line Refrigerator product not cold enough?
If your U-Line Refrigerator isn't cold enough, remember that air temperature isn't the same as product temperature. Try adjusting the temperature to a cooler setting. Also, check that the unit isn't in a hot area or direct sunlight, that the door is sealing properly, that the interior light hasn't been on for too long, that nothing is blocking the front grille at the bottom, and that the condenser coil is clean.
What to do if U-Line 2000 digital display shows 1-16 or 99?
If your U-Line Refrigerator's digital display shows 1-16 or 99, a factory test mode may be enabled. To resolve this, adjust the temperature to 99 and press the LIGHT icon.
What to do if U-Line 2000 is not cold enough?
If your U-Line Refrigerator isn't cold enough, remember that the air temperature isn't the same as the product temperature. Try these steps: Adjust the temperature to a cooler setting. Make sure the refrigerator isn't in a place with high ambient temperatures or direct sunlight. Check that the door closes and seals correctly. Ensure the interior light hasn't been on for too long. Check that nothing is blocking the front grille at the bottom and that the condenser coil is clean.
What to do if U-Line 2000 digital display works, but the unit does not cool?
If the digital display of your U-Line Refrigerator is working but the unit is not cooling, make sure the unit is not in “Showroom Mode.” You can also momentarily unplug or interrupt the power supply to the unit.
What does it mean when my U-Line 2000 digital display shows ER or E followed by a number?
If the digital display of your U-Line Refrigerator shows ER or E followed by a number, it could mean the door was open too long (E3). Make sure the door is closing properly. For other error codes, it's best to contact U-Line Customer Service.
What to do if U-Line 2000 Refrigerator digital display and light do not work?
Make sure the U-Line Refrigerator is getting power. If it's cooling but the display is off, it might be in Sabbath mode.
How to stop my U-Line Refrigerator from freezing products?
If your U-Line Refrigerator is freezing products, especially those in contact with the rear wall, make sure no items are touching the rear wall. You might also need to adjust the temperature to a warmer setting.
Why is my U-Line Refrigerator freezing food?
If your U-Line Refrigerator is freezing product, especially items touching the rear wall, make sure that food isn't pressed against the back. Also, try setting the temperature a bit warmer.
Why U-Line 2000 interior light does not illuminate?
If the interior light in your U-Line Refrigerator isn't working, the light bulb might be defective. If the unit is cooling, it may be in Blackout mode.
General| Category | Refrigerator |
|---|---|
| Lighting | LED |
| Door Swing | Reversible |
| Installation | Built-In or Freestanding |
| Shelving | Adjustable |
| Defrost Type | Automatic |
| Finish | Stainless Steel |
Explains the meaning and severity of safety alert symbols and terms used in the manual.
Instructions for safely disposing of and recycling the appliance.
Details power supply, grounding, and wiring specifications for safe operation.
Provides precise measurements for cabinet cutouts and unit dimensions.
Covers preparation and mounting of custom appliance panels and plinths.
Explains how to align and adjust the unit's doors for proper sealing and swing.
Guides on initial startup and using the control panel functions.
Instructions for enabling and using the Sabbath mode feature.
Best practices for loading the unit to ensure proper airflow and cooling.
Provides guidance on optimal wine storage, rack placement, and temperature settings.
Guides on identifying and resolving common operational problems.
Information on filing warranty claims and understanding product liability.
Details on identifying, ordering, and replacing parts.
Covers handling, safety, and specifications for R600a refrigerant.
To Next Page