Need help?Do you have a question about the U-Line Echelon 2075R and is the answer not in the manual?
General| Model Number | 2075R |
|---|---|
| Category | Refrigerator |
| Finish | Stainless Steel |
| Defrost Type | Automatic |
| Cooling System | Forced Air |
| Installation | Built-In |
| Interior Light | LED |
| Shelves | Adjustable Glass |
| Temperature Control | Digital |
Crucial information before installation and operation, including safety warnings.
Recording unit details for service and validating warranty coverage.
Explanation of Danger, Warning, and Caution symbols for hazard identification.
Warning about child safety before discarding old refrigerators or freezers.
Safety during maintenance, electrical handling, and proper parts usage.
Proper placement, power requirements, environmental conditions, and clearance.
Proper grounding and plug usage for shock hazard prevention.
Positioning the unit for free air circulation through the front grille.
Wiping down the interior and ice bucket before initial operation.
Pressure, shut-off valve, and tubing recommendations for connection.
Detailed procedure for attaching the water line to the unit.
Allowing slack for water line in recessed installations for easy removal.
Importance of raising the bin arm if the ice maker is not in use.
Plugging in the unit and gently pushing it into its final location.
How to use adjustable feet for proper leveling and height adjustment.
Explains that doors are field reversible by moving hinge hardware.
Step-by-step instructions for removing the top hinge pin.
Instructions on removing and saving plastic screw plugs for reuse.
Moving hinge hardware and pivot plate for complete door reversal.
Steps to adjust door alignment for up to 1/4" correction.
Dimensions for U-Line's optional full overlay door panel kits.
Dimensions for custom door panels to be inserted into the frame.
Steps to remove the door handle and gasket for insert installation.
Procedure for inserting the custom door panel into the door front channel.
Steps to reassemble the door after custom insert installation.
Unit dimensions and required clearances for built-in installations.
Operating the temperature control for combo/refrigerator models.
Using the ON/OFF switch and temperature dial for ice makers.
Connecting power, water, and initial ice making process.
Expected temperatures for refrigerator and freezer sections.
How ice makers function, bin arm operation, and normal operating sounds.
Warning against using sharp objects to separate ice cubes.
How to set the temperature using the control knob.
Method for accurately measuring internal temperature.
Special considerations for operating in harsh outdoor/marine environments.
How to adjust the size of ice cubes by modifying water injection.
General and stainless steel exterior cleaning procedures and warnings.
Steps for cleaning the unit's interior with mild detergent.
Procedure to clean the condenser fins and grille every three months.
How to clean the solenoid valve inlet screen annually.
Steps for removing and installing glass shelves within the unit.
Steps for removing and installing shelves located in the door.
Caution and instructions for using the crisper drawer.
Procedure for replacing the unit's interior light bulb.
Warning against improper defrosting methods causing damage or voiding warranty.
Information on defrosting frost-free and cycle defrost models.
Steps to drain the water system before storing the unit.
Guidance for preparing and storing the unit, avoiding antifreeze.
How to contact for service and required information (model/serial number).
Importance of using U-Line genuine parts for longevity and warranty.
To Next Page
