To Next Page
C
Carly RichardsAug 27, 2025
How to adjust temperature if U-Line Refrigerator is not cold enough?
- JJoseph GonzalezAug 27, 2025
Adjust to a colder level. Be sure to allow 24 hours between temperature control adjustments.
How to adjust temperature if U-Line Refrigerator is not cold enough?
Adjust to a colder level. Be sure to allow 24 hours between temperature control adjustments.
What to do if my U-Line 2115R has no ice or not enough ice?
If the ice maker bin arm is up, the ice maker will not make ice. Make sure the ice maker bin arm is down.
What to do if my U-Line Refrigerator is not operating and the electronic display is blank?
If your U-Line refrigerator is not operating and the electronic display is blank, it could be due to no electrical supply. Plug the unit in or check the circuit breaker.
Why is my U-Line 2115R too cold?
If your U-Line refrigerator is too cold, it could be due to the control being set too cold. Try setting the control to a warmer setting and allow 24 hours for the temperature to stabilize.
General| Brand | U-Line |
|---|---|
| Model | 2115R |
| Category | Refrigerator |
| Language | English |
Overview of U-Line's history and product quality.
Discusses issues related to HFC-134A refrigerant and system moisture.
Essential guidelines and definitions for safe servicing procedures.
Details the warranty coverage for U-Line products and exclusions.
Outlines the procedures and conditions for product liability claims.
Explains the structure and meaning of U-Line serial numbers.
Provides guidelines for submitting warranty claims and required information.
Details requirements and alternatives for proving purchase for warranty claims.
A guide to assist in answering common customer questions before service.
A table for diagnosing issues based on system conditions.
Describes the characteristics and resistance of thermistor types used.
Lists common problems and their potential causes and remedies.
Explains the operational modes and sequences for the CLR2160 model.
Details the operational modes and logic for the CLRCO2175 model.
Explains the vapor/compression cycle for specific U-Line models.
Describes the cooling and defrost modes for these models.
Explains the normal vapor/compression cycle for these models.
Specifies acceptable operating temperature and humidity ranges.
Details the functions accessible via the Echelon electronic control keypad.
Outlines the options available for service diagnostics and adjustments.
Lists common error codes and their meanings for U-Line units.
A quick guide to Echelon control functions and model selection.
Explains the keypad options and modes for Origins models.
Details the functions accessible via the Origins electronic control keypad.
Lists diagnostic options for Origins electronic controls.
Covers procedures for leveling, door, and drawer alignment.
Instructions for ensuring the unit is properly leveled for optimal performance.
Steps for aligning the door on Echelon series models.
Steps for aligning the door on Origins series models.
Procedures for aligning the unit's drawers for proper function.
Guide for adjusting the thickness of ice cubes produced.
Instructions for replacing evaporator fan motors and accessing components.
Details drain and water supply connection procedures for specific models.
Steps and information required for ordering replacement parts.
Information about the anti-tip kit and its part number.
Wiring diagram for the CLR2160 model.
Wiring diagram for the CLRCO2175 model.
Wiring diagrams for multiple U-Line models.
Wiring diagrams for specific U-Line models.
Wiring diagrams for specific U-Line models.
Wiring diagram for the 2175RF model.
Wiring diagram for the CO2175F model.
Wiring diagrams for specific U-Line models.
Wiring diagrams for multiple U-Line models.
Wiring diagram for the ADA24R model.
