Why U-Line 2218BEV Refrigerator develops frost on internal surfaces?
If you see frost building up on the inside surfaces of your U-Line Refrigerator, a little frost on the back wall is normal and will disappear during the regular off cycle. However, if it's more than 1/4" thick, manually defrost the unit. High room temperature and humidity can cause frost, so ensure the door is closing and sealing properly.
What does ER mean on U-Line 2218BEV?
If the digital display on your U-Line Refrigerator shows 'ER' or 'E' followed by a number, it could mean the door was open too long (E3 error). Ensure the door is closing properly. For other error codes, contact U-Line Customer Service.
What to do if U-Line 2218BEV Refrigerator digital display functions, but unit does not cool?
If your U-Line Refrigerator isn't cooling but the digital display is working, make sure it's not in 'Showroom Mode'. To exit this mode, press and hold the COOLER icon, and within five seconds, press the LIGHT icon three times.
Why is my U-Line 2218BEV Refrigerator digital display working but the unit does not cool?
If the digital display of your U-Line Refrigerator is working but the unit isn't cooling, make sure it's not in “Showroom Mode.” If it is, briefly unplug the unit or cut off its power supply.
Why U-Line 2218BEV Refrigerator interior light does not illuminate?
If the interior light in your U-Line Refrigerator isn't working, the light bulb might be defective. If the unit is cooling, it may be in Blackout mode.
Why does my U-Line Refrigerator develop condensation on external surfaces?
If your U-Line Refrigerator has condensation on external surfaces, it is likely exposed to excessive humidity. The moisture should dissipate as humidity levels decrease.
Why does my U-Line 2218BEV Refrigerator develop frost on internal surfaces?
If your U-Line Refrigerator develops frost on internal surfaces, remember that some frost on the rear wall is normal and will melt during the off cycle. However, if there's a build-up of 1/4” or more, manually defrost the unit and ensure the door is closing and sealing properly. High ambient temperature and excessive humidity can also produce frost.
Why is my U-Line 2218BEV Refrigerator product freezing?
If your U-Line Refrigerator is freezing products, especially those touching the rear wall, ensure that items are not in contact with the rear wall. You might also need to adjust the temperature to a warmer setting.
Why do the digital display and light not work on my U-Line 2218BEV Refrigerator?
If the digital display and light on your U-Line Refrigerator aren't working, first check that the unit is properly connected to a power source. If the unit is cooling, it might be in Sabbath mode.
What to do if U-Line 2218BEV Refrigerator digital display works, but the unit does not cool?
If the digital display of your U-Line Refrigerator is working but the unit is not cooling, make sure the unit is not in “Showroom Mode.” You can also momentarily unplug or interrupt the power supply to the unit.
General| Brand | U-Line |
|---|---|
| Model | 2218BEV |
| Category | Refrigerator |
| Type | Beverage Center |
| Door Swing | Right |
| Installation | Built-In |
| Defrost Type | Automatic |
| Lighting | LED |
| Voltage | 115V |
| Frequency | 60Hz |
| Refrigerant Type | R600a |
| Control Type | Digital |
| Temperature Range | 34°F to 50°F |
| Shelving | Adjustable |
To Next Page
