To Next PageTo Next Page
Need help?Do you have a question about the U-Line CLR6O and is the answer not in the manual?
Explains how to determine unit manufacturing date from serial number format.
Instructions on how to ensure the ice maker is level using its feet.
Clearance requirements for water, drain, electrical connections, and airflow.
Visual examples of proper and improper gravity drain setups.
Step-by-step guide for performing the automatic cleaning cycle using specific cleaner.
Instructions for cleaning the ice storage bin using soap, water, and bleach.
Explanation of how the ice machine stops automatically when the bin is full.
Describes the meaning of different LED light flashes on the control board.
Instructions for measuring compressor winding resistance and pin identification.
Common causes and remedies for unit failure with a drain pump.
Causes and remedies for unit failure without a drain pump.
Troubleshooting steps when the control board light is on but the unit is off.
Reasons and solutions for the unit not producing ice.
Factors affecting low ice production and their solutions.
Troubleshooting when ice fails to eject due to water freezing.
Issues causing slow ice release and how to fix them.
Causes and remedies for the unit not filling with water.
Troubleshooting continuous ice production issues.
Further causes for low or no ice production, including dirty coils.
Reasons for poor ice quality and how to improve it.
Diagnosing why the unit isn't freezing when essential components are running.
Addressing issues with shallow or incomplete ice cubes.
Troubleshooting when the compressor and fan are not operating.
Causes and remedies when neither compressor nor fan are running.
Specific troubleshooting for units equipped with the P-60 drain pump.
Identifying and fixing water leaks originating from under the unit.
Issues related to water accumulation within the ice bin.
Solutions for the unit continuously filling with water.
Causes of unusual noise from the unit and how to resolve them.
General