Need help?Do you have a question about the U-Line CLR1215 and is the answer not in the manual?
General| Clear Ice Technology | Yes |
|---|---|
| Condenser Type | Air-Cooled |
| Water Connection | 1/4" OD Compression |
| Housing Material | Stainless Steel |
| Drain Required | Yes |
| Electrical Requirements | 115V, 60Hz |
| Door Style | Solid |
| Refrigerant | R134a |
| Voltage | 115V |
Defines risk levels (Danger, Warning, Caution) used throughout the guide.
Procedures for safely disposing of the appliance, including child entrapment warnings.
Specifies operating temperature and humidity conditions for the unit.
Details electrical grounding, power supply, and wiring requirements.
Provides necessary dimensions for unit installation and clearances.
Illustrates the physical dimensions of the appliance.
Steps for connecting the water supply line to the unit.
Instructions for connecting the drain line, including gravity drain specifics.
General steps for installing the unit, including leveling.
Information and preparation steps for integrating a custom panel.
Instructions for removing and installing the front grille or base fascia.
Details clearance requirements for door opening based on installation type.
Procedures for aligning, adjusting, and reversing the unit's door.
Initial startup procedures and recommendations for the unit.
Explains the functions and operation of the unit's control panel.
Details ice cube thickness adjustment and related information.
Instructions for preparing the unit for Sabbath observance.
Guidelines for ensuring proper airflow for efficient operation.
General cleaning instructions for exterior and interior surfaces.
How to run the self-cleaning cycle for the ice machine.
Procedure for cleaning the unit's condenser.
Steps for preparing the unit for extended periods of non-use or winterization.
Guide to diagnosing and resolving common operational issues.
Electrical schematic illustrating component connections.
Table correlating system conditions with possible causes and remedies.
Technical data and specifications for the unit's compressor.
Advanced troubleshooting tips for specific errors and issues.
Lists and explains error codes that may appear on the unit's display.
Information about thermistors, their function, and testing.
Information on service modes for unit controls.
A quick reference guide for navigating the unit's service mode menus.
Detailed information on thermistor types, locations, and resistance data.
Information regarding defrost functions for the models.
Outlines the terms and conditions of the product warranty.
Defines parameters and required documentation for filing a warranty claim.
Instructions on how to order replacement parts for the unit.
To Next Page
