U-Line H-1029 Operating Instructions

12 pages

To Next Page

PAGE 1 OF 12 0919 IH-161

IMPULSE SEALERS

H-161, H-163, H-190

H-293, H-306, H-458

H-963, H-1029, H-1252

PARTS

Cutting Blade

Bracket Assembly

(H-161, H-293, H-963

and H-1252 only)

Handle

Knob

BOTTOM VIEW

SEALING ARM

(H-161, H-293, H-963

and H-1252 only)

Rubber Pressure Pad

Rear Metal

Plate

Timer Assembly

Sealer Body

Heating Element

Front Metal Plate

Teflon Cover

Power Cord

Hinge Pin

Hinge

Bracket

Lower Teflon Tape

Heating

Element

Cover

Pressure Plate

Assembly

Pressure

Plate

Spring

Cutting Blade

Sealing Arm

Microswitch

Assembly

Wire Nut

Ground

Wire

(green)

Transformer

& Support

Brackets

Internal

Wiring

Timer Connector

Plug

Base Plate

Rubber Foot

Timer Assembly

Bow

Spring

Assembly

Microswitch

Adjustment

Screw

Arm Return

Spring

Para Español, vea páginas 5-8.

Pour le français, consulter les pages 9-12.

Other manuals for U-Line H-1029

Manual18 pages

Questions and Answers:

J
jennifer79Aug 7, 2025
What to do if plastic bag sticks to sealing arm of U-Line H-1029 Food Saver?
- A
  Amy AndersonAug 7, 2025
  If the plastic bag sticks to the sealing arm of your U-Line Food Saver, it indicates that there was not enough cooling time. To resolve this, keep the arm down for a longer period after the light turns off.
M
Michael SmithAug 22, 2025
Why is the bag seal damaged on my U-Line H-1029?
- S
  Shelby MillerAug 22, 2025
  If the bag seal is damaged or broken on your U-Line Food Saver, it might be because the heating time is too long. Reset the timer knob.