PAGE 1 OF 9 0721 IH-2272
1-800-295-5510
uline.com
H-2272
8" HANDS-FREE
TOWEL DISPENSER
USING THE PUSH BUTTON LOCK FEATURE
1. Open dispenser and raise end of lock spring just
enough to pop out the gray decorative hole plug.
(See Figure 1)
NOTE: Do not overstress the lock spring.
2. Remove push button from back of dispenser.
(See Figure 2)
3. Slide push button under lock spring at the top of the
dispenser and insert button through hole in door.
(See Figure 3)
4. Release lock spring and close dispenser. (See Figure 4)
OPTIONAL PUSH BUTTON LOCK INSTALLATION
PARTS
Dispenser x 1 Wall Anchor x 4 Screw x 4Dispenser Key x 1
Figure 3
Figure 4
Figure 2
Push Buttons
Figure 1
Push Button
Lock Spring
Decorative
Hole Plug
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.
TOOLS NEEDED
Level
Tape Measure1/4" Drill BitElectric Drill Phillips Screwdriver
To Next Page
Need help?
General
