U-Line H-1036 User Manual

PAGE 1 OF 18 0316 IH-1036
H-1036
ELECTRONIC KRAFT
TAPE DISPENSER
1-800-295-5510
uline.com
π
IMPORTANT!
Read this manual thoroughly and
familiarize yourself with ALL controls
and operating features. Keep this
manual for future reference and
maintenance.
Unpacking: Check the machine
for damage. If damage is found,
return to Uline.
TECHNICAL DATA
Dimensions of machine: 17¾ x 11½ x 9¾"
Weight of machine: 26½ lbs.
Voltage and frequency: see machine label
Control circuit in DC 115 Volts
Electrical power: 100W
Dispensing velocity: 2.5 ft. or 30" / sec.
Length: min. 4" / max. 46"
Sound measured in a room:
less than 70 dB (A)
TAPE
Types of gummed tape: All
PAPER FEATURES
Width: min. 3/4" / max. 4"
Maximum roll diameter: 7¾" ; with device
for bigger rolls (supplied on request) 11¾"
Para Español, vea páginas 7-12.
Pour le français, consulter les pages 13-18.

U-Line H-1036 Specifications

General

Brand	U-Line
Model	H-1036
Category	Dispenser
Language	English

Summary

General Safety and Usage

Important Initial Warnings

Read manual thoroughly, familiarize with controls, keep for future reference, check for damage upon receipt.

Technical Data and Specifications

Machine and Tape Specifications

Details on dimensions, weight, power, dispensing speed, length limits, tape types, and paper features.

General Information and Setup

Safety and Operational Guidelines

Only trained personnel, use gummed tape only, verify voltage, keep machine clean and dry.

Install Water Reservoir and Bottle

Steps to wash, insert, and attach the water reservoir and fill the water bottle.

Install Brackets and Top Heater

Mounting bottle brackets and installing the top heater assembly onto the dispenser.

Tape Dispenser Setup and Operation

Guide and Tape Loading

Installing the upper plate guide and loading the tape roll correctly.

Dispensing and Programming Tape Lengths

Using preset, custom, and programmed lengths, including intermediate settings.

Top Heater Usage and Storage

Instructions for using the top heater and proper storage when the dispenser is not in use.

Maintenance and Care

Routine Maintenance Schedule

Weekly tasks include washing the brush and cleaning with compressed air.

Monthly Maintenance and Cleaning

Lubricate blades, clean components, and specific instructions for heater cleaning.

Reference Information

Component Identification

Diagram and key identifying all parts of the electronic kraft tape dispenser.