PAGE 5 OF 30 0318 IH-7259
3. Use the arrow keys to move the cursor to Film Type.
Press the SELECT button on the left to select Film Type.
(See Figure 14)
4. Use the arrow keys and SELECT button to set each digit
to match the film code for the corresponding item
number. After the last digit has been set, press the
SELECT button to save the film code. (See Figure 15)
INSTALL SET-UP
[Film 1 A124PT ]
Winder Dia 37"
SELECT BACK
FILM TYPE 4S
>Film Type A08C*
^
SELECT BACK
Figure 14
Figure 15
FILM CODE SETTINGS
CHANGE THE FILM CODE SETTINGS
1. Press the up and down arrows and the reset button at
the same time to access the menu. (See Figure 12)
2. Use the arrow buttons to move the cursors on either
side of the screen to Engineering. Press the select
button on the left to select Engineering. (See Figure 13)
FILM CODE SETTINGS
ITEM NO. DIMENSIONS FILM CODE
S-19738 Medium Premium (1/2" inflated) 12" x 2,050' Perf 12" A1S7LJ
S-19739 Medium Premium (1/2" inflated) 24" x 2,050' Perf 12" A1T7HT
S-19740 Large Premium (3/4" inflated) 12" x 1,250' Perf 12" A124PT
S-19741 Large Premium (3/4" inflated) 24" x 1,250' Perf 12" A124PT
S-19742 XL Premium (1" inflated) 12" x 1,167' Perf 12" A144RT
S-19743 XL Premium (1" inflated) 24" x 1,167' Perf 12" A1T4RT
NOTE: The factory default film setting is S-19740.
Figure 12
Up
Arrow
Reset
Down
Arrow
Screen
Select
Start
Key
Stop
Key
MENU
[Install Set-Up ]
Diagnostics
SELECT BACK
Figure 13
To Next Page
Loading...