U-Line U-CO1224FB-00B User Manual

USER GUIDE
Control Operation - Service 5
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
27. SOFTWARE VERSION —
USER INTERFACE
Displays software version of the user interface.
28. LOG IN PERIOD
Factory use only - do not adjust.
29. FACTORY TEST MODE
Should be 0.
0. EXIT SERVICE MODE
MODEL LIST
Model List
PROGRAMMING THE UNIT TO CORRECT
MODEL NUMBER
1. Disconnect the unit from power source.
2. Push and hold the U-Line button.
3. While still holding the U-Line button, plug the
unit into the appropriate power source.
4. When the flashing digits appear (3-5 seconds),
use the up and down arrow buttons to select the
appropriate model number*.
*(See Above “Model List”)
5. Press the light bulb button once.
6. The display will blink, and then will appear as the
programmed display.
1000 MODEL
INDICATOR
2000 (120V) MODEL
INDICATOR
2000 (230V) MODEL
INDICATOR
1215R 07 2218R 05 2245R 55
1215WC 12 2218RGL 04 2245DC 54
1224BEV 13 2218WC 06 2245WC 56
1224DWR 08 2224BEV 00 2260DC 50
1224R 14 2224FZR 11 2260FZR 57
1224RF 09 2224R 02 2260R 52
1224RSOD 10 2224RGL 01 2260RDC 51
1224WC 15 2224WC 03 2260WC 53
CLR1215
18*
2224ZWC 59 2260ZWC 58
CO1224F 19 ADA24R 17
or
*
UNITS 2020 AND NEWER USE #11
48

U-Line U-CO1224FB-00B Specifications

General

Brand	U-Line
Model	U-CO1224FB-00B
Category	Refrigerator
Language	English