U-Line ULN-BI95WH-00 User Manual (English)

Other manuals for U-Line ULN-BI95WH-00

Installation Guide19 pages

Install Guide19 pages

Questions and Answers:

E
egardnerAug 6, 2025
What to do if my U-Line Ice Maker product is not cold enough?
- K
  krystal71Aug 6, 2025
  If your U-Line combo model isn't cold enough, remember that air temperature doesn't always reflect product temperature. Check the product temperature, adjust the temperature to a cooler setting, ensure the unit isn't in direct sunlight or high ambient temperatures, and confirm the door is sealing properly. Also, make sure the interior light isn't staying on for too long, the front grille isn't blocked, and the condenser coil is clean.
L
larryterrellAug 10, 2025
Why is my U-Line Ice Maker unit developing frost on internal surfaces?
- J
  jeremypinedaAug 11, 2025
  High ambient temperature and excessive humidity can cause frost to develop on the internal surfaces of your U-Line ice maker. If it's a manual defrost model, defrost it when the build-up is 1/4" or more. Also, make sure the door is closing and sealing properly.
K
kathy48Aug 15, 2025
What to do if my U-Line Ice Maker product is freezing?
- L
  Lorraine WhiteAug 16, 2025
  If your U-Line combo model is freezing, adjust the temperature to a warmer set-point.
M
Mrs. Rachel DiazAug 21, 2025
What to do if my U-Line Ice Maker cubes are sticking together?
- L
  Lisa ThomasAug 21, 2025
  If your U-Line ice cubes are sticking together, it's likely due to limited use or high ambient temperatures. Gently shake the bucket to break them apart.
A
Andrew JonesAug 26, 2025
Why is my U-Line Ice Maker unit developing condensation on external surfaces?
- B
  Bradley HurleyAug 26, 2025
  If your U-Line unit is developing condensation on external surfaces, it's likely exposed to excessive humidity. The moisture should dissipate as humidity levels decrease.
M
Michael WolfAug 31, 2025
How to fix U-Line Ice Maker light that remains on when door is closed?
- J
  Jacqueline HuffmanAug 31, 2025
  To fix a U-Line ice maker light that remains on when the door is closed, adjust the light actuator bracket on the bottom of the door.

U-Line ULN-BI95WH-00 Specifications

General

Brand	U-Line
Model	ULN-BI95WH-00
Category	Ice Maker
Language	English

Summary

Introduction

Please Record Your Model Information

Instructions for recording product model and serial number for service and information.

NOTICE

Important advisory to read instructions before first use and keep guide accessible.

Before Calling Service

Guidance on troubleshooting steps and consulting sections before contacting service.

Safety Precautions

Safety Alert Definitions

Explanation of Danger, Warning, and Caution labels used throughout the guide.

General Precautions

Essential safety guidelines for using the appliance as intended.

Product Features

Ice Makers Feature

Details on ice production, storage, installation, and materials for ice maker models.

ADA15IM Model Features

Specific features of ADA15IM models, including door locks and stainless steel options.

Combo® Models Feature

Features specific to Combo models, including temperature control and shelving.

CO1175 and B12115 Model Feature

Features for CO1175 and B12115 models, such as leveling legs and stainless steel finishes.

B12115 Model Features

Additional features for B12115 models, like optional door panels and self-closing doors.

Product Operation

Air Flow

Importance of proper air circulation for unit efficiency and performance.

Initial Startup

Steps for initial unit startup and recommendations before loading product.

Control Dial

Explanation of the control dial function for temperature setting in various models.

Safety Precautions

DANGER

Critical safety warning regarding child entrapment in old appliances.

WARNING

Safety warning for electrical grounding requirements and avoiding shock hazards.

CAUTION

Cautionary advice on handling the unit and safe defrosting practices.

Product Features

Ice Makers Feature

Details on ice production, storage, installation, and materials for ice maker models.

ADA15IM Model Features

Specific features of ADA15IM models, including door locks and stainless steel options.

Combo® Models Feature

Features specific to Combo models, including temperature control and shelving.

CO1175 and B12115 Model Feature

Features for CO1175 and B12115 models, such as leveling legs and stainless steel finishes.

B12115 Model Features

Additional features for B12115 models, like optional door panels and self-closing doors.

Product Operation

Air Flow

Importance of proper air circulation for unit efficiency and performance.

Initial Startup

Steps for initial unit startup and recommendations before loading product.

Control Dial

Explanation of the control dial function for temperature setting in various models.

Product Operation

Adjusting Air Temperature

Guide on adjusting the temperature settings for optimal cooling performance.

Adjusting Ice Harvest

Instructions for adjusting ice cube production rate for BI models.

Checking Product Temperature

Method for measuring and verifying the internal temperature of the unit.

Ice Maker

Ice Maker Operation

Information on how the ice maker functions, including full bin shutoff and normal sounds.

Ice Maker Adjustment

Steps to adjust ice cube thickness by modifying water injection.

Maintenance

Leveling

Instructions for ensuring the unit is level for proper door and ice maker operation.

Removing and Installing Interior Shelves

Procedure for safely removing and reinstalling adjustable glass shelves.

Maintenance

Removing and Installing Grille

Steps for safely removing and reinstalling the front grille for access.

Removing and Installing Door Shelves

Guide on how to remove and install shelves located within the door.

Standard Doors

Door Alignment and Adjustment

How to align and adjust doors for proper sealing and cooling efficiency.

Door Reversability

Information on whether doors can be mounted on the opposite side of the cabinet.

Reversing the Door

Detailed steps for physically reversing the door swing direction.

Standard Doors

Reversing the Door

Detailed steps for physically reversing the door swing direction.

Doors (Self-Closing)

Door Alignment and Adjustment

How to align and adjust doors for proper sealing and cooling efficiency.

Door Reversability

Information on whether doors can be mounted on the opposite side of the cabinet.

Doors (Self-Closing)

Reversing Black or White Doors

Specific instructions for reversing doors on black or white models.

Doors (Self-Closing)

Reversing Stainless Steel Glass Doors

Specific instructions for reversing doors on stainless steel glass models.

Doors (Self-Closing)

Reversing Stainless Steel Glass Doors

Specific instructions for reversing doors on stainless steel glass models.

Doors (Self-Closing)

Reversing Stainless Steel Glass Doors

Specific instructions for reversing doors on stainless steel glass models.

Cleaning

Exterior Cleaning

Guidelines for cleaning the exterior surfaces of vinyl clad and stainless steel models.

Interior Cleaning

Instructions for cleaning the interior of the unit and removable components.

Defrosting

Manual Defrost Models

Information on manual defrost requirements for certain models and its frequency.

Defrosting

Manual Defrost Models

Information on manual defrost requirements for certain models and its frequency.

Maintenance

Condenser Cleaning

Schedule and procedure for cleaning the condenser unit for optimal efficiency.

Storage, Vacation and Moving

Steps to follow when the unit is not in use for extended periods.

Product Disposal

Guidelines for safely and responsibly disposing of the appliance.

Service

Before Calling for Service

Advice on troubleshooting and checking sections before contacting U-Line for service.

If Service is Required

Information on contacting U-Line for service and the required model/serial numbers.

Replacement Parts

Recommendation to use genuine U-Line replacement parts for performance and warranty.

Normal Operating Sounds

Description of common sounds the unit may make during normal operation.

Troubleshooting Guide

Troubleshooting - What to check when problems occur

A guide to common problems, their possible causes, and remedies.

Related product manuals

U-Line ULN-BI95B-00

21 pages

U-Line ULN-BI95BTP-03

U-Line ULN-BI95WH-00 User Manual

Table of Contents

Other manuals for U-Line ULN-BI95WH-00

Questions and Answers:

U-Line ULN-BI95WH-00 Specifications

Summary

Introduction

Please Record Your Model Information

NOTICE

Before Calling Service

Safety Precautions

Safety Alert Definitions

General Precautions

Product Features

Ice Makers Feature

ADA15IM Model Features

Combo® Models Feature

CO1175 and B12115 Model Feature

B12115 Model Features

Product Operation

Air Flow

Initial Startup

Control Dial

Safety Precautions

DANGER

WARNING

CAUTION

Product Features

Ice Makers Feature

ADA15IM Model Features

Combo® Models Feature

CO1175 and B12115 Model Feature

B12115 Model Features

Product Operation

Air Flow

Initial Startup

Control Dial

Product Operation

Adjusting Air Temperature

Adjusting Ice Harvest

Checking Product Temperature

Ice Maker

Ice Maker Operation

Ice Maker Adjustment

Maintenance

Leveling

Removing and Installing Interior Shelves

Maintenance

Removing and Installing Grille

Removing and Installing Door Shelves

Standard Doors

Door Alignment and Adjustment

Door Reversability

Reversing the Door

Standard Doors

Reversing the Door

Doors (Self-Closing)

Door Alignment and Adjustment

Door Reversability

Doors (Self-Closing)

Reversing Black or White Doors

Doors (Self-Closing)

Reversing Stainless Steel Glass Doors

Doors (Self-Closing)

Reversing Stainless Steel Glass Doors

Doors (Self-Closing)

Reversing Stainless Steel Glass Doors

Cleaning

Exterior Cleaning

Interior Cleaning

Defrosting

Manual Defrost Models

Defrosting

Manual Defrost Models

Maintenance

Condenser Cleaning

Storage, Vacation and Moving

Product Disposal

Service

Before Calling for Service