U-Line ULN-BI98B-00 User Manual (English)

Other manuals for U-Line ULN-BI98B-00

Installation Guide19 pages

Install Guide19 pages

Questions and Answers:

J
Joe JacobsAug 6, 2025
What to do if my U-Line Ice Maker product is not cold enough?
- M
  mkennedyAug 6, 2025
  If your U-Line combo model isn't cold enough, remember that air temperature doesn't always reflect product temperature. Check the product temperature, adjust the temperature to a cooler setting, ensure the unit isn't in direct sunlight or high ambient temperatures, and confirm the door is sealing properly. Also, make sure the interior light isn't staying on for too long, the front grille isn't blocked, and the condenser coil is clean.
J
Jonathan McleanAug 11, 2025
Why is my U-Line Ice Maker unit developing frost on internal surfaces?
- T
  Thomas BarajasAug 11, 2025
  High ambient temperature and excessive humidity can cause frost to develop on the internal surfaces of your U-Line ice maker. If it's a manual defrost model, defrost it when the build-up is 1/4" or more. Also, make sure the door is closing and sealing properly.
W
Wanda GarciaAug 15, 2025
What to do if my U-Line Ice Maker product is freezing?
- A
  Aimee Holmes DVMAug 16, 2025
  If your U-Line combo model is freezing, adjust the temperature to a warmer set-point.
J
Jennifer CarpenterAug 20, 2025
What to do if my U-Line Ice Maker cubes are sticking together?
- L
  Laura GriffinAug 20, 2025
  If your U-Line ice cubes are sticking together, it's likely due to limited use or high ambient temperatures. Gently shake the bucket to break them apart.
S
Scott MataAug 27, 2025
Why is my U-Line Ice Maker unit developing condensation on external surfaces?
- D
  Dawn RileyAug 27, 2025
  If your U-Line unit is developing condensation on external surfaces, it's likely exposed to excessive humidity. The moisture should dissipate as humidity levels decrease.
D
Darrell ArellanoAug 31, 2025
How to fix U-Line Ice Maker light that remains on when door is closed?
- S
  Stephanie SmithAug 31, 2025
  To fix a U-Line ice maker light that remains on when the door is closed, adjust the light actuator bracket on the bottom of the door.

U-Line ULN-BI98B-00 Specifications

General

Type	Undercounter Ice Maker
Ice Production	23 lbs/day
Finish	Black
Dimensions (H x W x D)	25 1/16" x 14 15/16" x 22 1/16"
Condenser Type	Air-Cooled
Clear Ice Technology	Yes
Drain Type	Gravity Drain
ENERGY STAR Qualified	No
Undercounter Ice Maker	Yes
Refrigerant Type	R134a
Ice Type	Clear Ice
Water Connection	1/4" OD copper tubing
Refrigerant	R134a
Power Source	120V/60Hz
Door Style	Solid
Electrical Requirements	115V, 60Hz, 5.5A
Power Requirements	115V, 60Hz, 5.5A

Summary

Introduction

Please Record Your Model Information

Instructions for recording model and serial numbers for product assistance and warranty.

Safety Precautions

Safety Alert Definitions

Defines safety alert levels (Danger, Warning, Caution) used throughout the guide.

General Precautions

General safety guidelines for using the appliance, including child entrapment and electrical hazards.

Product Features

Ice Makers Feature

Details high ice production, storage, no drain requirement, and vinyl-clad cabinet features.

ADA15IM Model Features

Highlights factory-installed door locks and stainless steel models.

Combo® Models Feature

Mentions mechanical temperature control and adjustable glass shelves.

CO1175 and B12115 Model Feature

Describes adjustable leveling legs and stainless steel models.

B12115 Model Features

Covers optional door panel kits and self-closing doors.

Product Operation

Air Flow

Emphasizes the need for proper airflow for efficient operation and avoiding malfunctions.

Initial Startup

Recommends running the unit overnight before loading and discarding initial ice.

Control Dial

Details how the control dial sets temperature and mentions factory default settings.

Adjusting Air Temperature

Instructions on adjusting the set point temperature in small increments for stabilization.

Adjusting Ice Harvest

Explains how to adjust the ice maker screw for colder or warmer ice production.

Checking Product Temperature

Steps to check actual product temperature using a thermometer and water bottle.

Ice Maker

Ice Maker Operation

Explains the shut-off mechanism when the ice bucket is full and refrigeration system operation.

Ice Maker Adjustment

Details adjusting the ice maker screw for desired ice cube size.

Maintenance

Leveling

Instructions for leveling the unit using adjustable feet or a level surface.

Removing and Installing Interior Shelves

Steps for removing and reinstalling glass shelves with shelf supports.

Removing and Installing Grille

Procedure for removing and installing the front grille, including warnings.

Removing and Installing Door Shelves

Instructions for removing and installing door shelves.

Standard Doors

Door Alignment and Adjustment

Steps to align and adjust the door for proper sealing and cooling.

Door Reversability

Explains which models are field-reversible and which need special ordering.

Reversing the Door

Detailed steps for reversing the door for black/white models.

Reversing Black or White Doors

Remove Door

Instructions for removing the door for black or white models.

Remove hole plugs

Instructions for removing and saving hole plugs during door reversal.

Remove existing top hinge

Steps to remove the existing top hinge for door reversal.

Reinstall hinge to bottom opposite

Instructions for reinstalling the top hinge to the bottom opposite side.

Reversing Stainless Steel Glass Doors

Remove Door

Instructions for removing the door from stainless steel glass models.

Remove hole plugs

Instructions for removing and saving hole plugs during door reversal.

Remove Stainless Frame

Steps to remove the stainless frame from the door.

Assemble Stainless Frame

Stainless Frame Assembly

Steps for assembling the stainless steel frame onto the door.

Orient Hinge

Instructions for removing and reinstalling the existing top hinge.

Reinstall hinge to bottom opposite

Instructions for reinstalling the removed hinge to the bottom opposite side.

Remove existing bottom hinge

Steps to remove the existing bottom hinge.

Reinstall hinge to top opposite

Instructions for reinstalling the removed bottom hinge to the top opposite side.

Reinstall Hole Plugs

Instructions for reinstalling hole plugs in the new hinge locations.

Install Door

Steps for installing the door after hinge reversal.

Cleaning

Exterior Cleaning

Guidelines for cleaning vinyl clad and stainless steel exteriors.

Interior Cleaning

Instructions for cleaning the interior and removable components.

Defrosting

Procedure for manually defrosting the unit, with warnings.

Condenser Cleaning

Condenser Coil Cleaning

Instructions for cleaning the condenser coil for optimal efficiency.

Storage, Vacation and Moving

Steps for storing the unit for extended periods, including draining water.

Product Disposal

Guidelines for safe and legal disposal of the appliance.

Service

Before Calling for Service

Advice on troubleshooting and checking operation before contacting service.

If Service is Required

Guidance on what information to have ready when contacting U-Line for service.

Replacement Parts

Recommendation to use only genuine U-Line replacement parts.

Normal Operating Sounds

Description of common sounds the unit may produce during operation.

Troubleshooting Guide

A guide to common problems, their possible causes, and remedies.

PRODUCT INFORMATION

SERVICE INFORMATION

Contact information for general inquiries, service assistance, and parts.

BUILDING ON THREE GENERATIONS OF INNOVATION

Information about U-Line's history and product range.

Related product manuals

U-Line ULN-BI95BTP-03

U-Line ULN-BI98B-00 User Manual

Table of Contents

Other manuals for U-Line ULN-BI98B-00

Questions and Answers:

U-Line ULN-BI98B-00 Specifications

Summary

Introduction

Please Record Your Model Information

Safety Precautions

Safety Alert Definitions

General Precautions

Product Features

Ice Makers Feature

ADA15IM Model Features

Combo® Models Feature

CO1175 and B12115 Model Feature

B12115 Model Features

Product Operation

Air Flow

Initial Startup

Control Dial

Adjusting Air Temperature

Adjusting Ice Harvest

Checking Product Temperature

Ice Maker

Ice Maker Operation

Ice Maker Adjustment

Maintenance

Leveling

Removing and Installing Interior Shelves

Removing and Installing Grille

Removing and Installing Door Shelves

Standard Doors

Door Alignment and Adjustment

Door Reversability

Reversing the Door

Reversing Black or White Doors

Remove Door

Remove hole plugs

Remove existing top hinge

Reinstall hinge to bottom opposite

Reversing Stainless Steel Glass Doors

Remove Door

Remove hole plugs

Remove Stainless Frame

Assemble Stainless Frame

Stainless Frame Assembly

Orient Hinge

Reinstall hinge to bottom opposite

Remove existing bottom hinge

Remove existing bottom hinge

Reinstall hinge to top opposite

Reinstall Hole Plugs

Install Door

Cleaning

Exterior Cleaning

Interior Cleaning

Defrosting

Condenser Cleaning

Condenser Coil Cleaning

Storage, Vacation and Moving

Product Disposal

Service

Before Calling for Service

If Service is Required

Replacement Parts

Normal Operating Sounds

Troubleshooting Guide

PRODUCT INFORMATION

SERVICE INFORMATION

BUILDING ON THREE GENERATIONS OF INNOVATION

Related product manuals