VIII. Cleaning the Machine
5. Remove the bowl gasket
6.Take all of the disassembled pieces and wash with food grade soap, rinse fully, and
sanitize.
7.Carefully wipe down the top and sides of the machine.
8.Reassemble the machine and allow it to air dry.
9.The machine should now be ready for further use.
IX. Assembling Machine
1.Put the bowl gaskets back on. Start from the bottom and work your way around.
For questions or concerns, e-mail service@ussolid.com, visit www.ussolid.com, or
call (800) 243-5428
To Next Page
Loading...