Need help?Do you have a question about the Uberhaus MPN2-12ERN1-BH2 and is the answer not in the manual?
General| BTU | 12000 |
|---|---|
| Cooling Capacity | 3.5 kW |
| Power Supply | 220-240V, 50Hz |
| Power Consumption | 1.1 kW |
| Refrigerant | R410A |
| Type | Split |
| Noise Level | 52 dB(A) (Outdoor) |
| Net Weight | 30 kg (Outdoor) |
Covers essential safety rules, operating conditions, and energy-saving tips for the air conditioner.
Lists the necessary tools required for the proper installation of the window kit.
Details electrical safety requirements, including grounding and proper receptacle use.
Lists all the parts included in the package with their respective quantities.
Identifies and labels the components on the front of the air conditioner unit.
Identifies and labels the components on the rear of the air conditioner unit.
Explains how to use the control panel and remote controller for various functions.
Describes the functions of each button on the air conditioner's control panel.
Lists common error codes and provides initial troubleshooting steps for the unit.
Explains indicator lights and how to use the panel lock feature.
Details how to operate the unit in COOL, HEAT, DRY, AUTO, and FAN modes.
Explains how to set the auto start and stop timer functions.
Describes the Sleep mode for temperature adjustment and the Lock function for panel security.
Covers power outage behavior, restart delay, and air flow direction adjustment.
Specifies ideal placement and spacing for the air conditioner for optimal performance.
Provides guidance on installing the window slider kit for different window types.
Step-by-step instructions for installing the unit in a double-hung sash window.
Step-by-step instructions for installing the unit in a sliding sash window.
Instructions for installing the exhaust hose for COOL and FAN/DEHUMIDIFY modes.
Important notes regarding covering the hole and duct bending.
Instructions for draining water during dehumidifying modes, including connector usage.
Procedure for handling the 'P1' error when the bottom tray is full.
General important points to follow before cleaning or servicing the unit.
Details on cleaning, removing, and mounting the air filters for optimal performance.
Instructions for cleaning the exterior of the air conditioner unit.
Steps for preparing the unit for long-term storage, including draining and drying.
Troubleshooting steps for when the unit does not start when the power button is pressed.
Addresses issues like insufficient cooling, noise, vibration, and gurgling sounds.
Explains the power shutoff in heating mode due to overheat protection.
Details the technical specifications of the remote controller, including model, voltage, and range.
Provides guidance on proper handling and important cautions for using the remote controller.
Instructions on how to replace the batteries in the remote controller.
Important cautions regarding battery usage and maintenance for the remote controller.
Details the function of each button on the remote controller for various operations.
Explains how to select operating modes and control the louver swing.
Describes how to adjust temperature settings and timer functions using the remote.
Explains the Sleep mode, Reset function, and how to adjust fan speed using the remote.
Details the Timer, Clock, LED, and Lock functions for comprehensive remote control.
Explains the transmission indicator and how different modes are displayed on the remote.
Details the display for temperature, time, fan speed, lock, and sleep status.
Step-by-step guide for setting the initial time on the remote controller.
Instructions on how to adjust or reset the clock time on the remote controller.
How to initiate the AUTO mode and set desired temperature and fan speed.
How to stop the air conditioner and manually select modes if AUTO is uncomfortable.
Details on operating the unit in COOL, HEAT, and FAN ONLY modes, including temperature and fan adjustments.
Step-by-step guide for operating the air conditioner in DRY mode.
Instructions for setting the timer to turn the unit ON or OFF automatically.
How to cancel or change existing timer settings for the air conditioner.
Example demonstrating how to set the timer to start the air conditioner at a specific time.
Example demonstrating how to set the timer to stop the air conditioner at a specific time.
Setting the timer to stop and then restart the air conditioner later.
Setting the timer to start and then stop the air conditioner later.
Details the 36-month warranty, customer service contact, and terms of coverage.
To Next Page